More About The DIY Solar Home Kit
Solar electric systems convert sunlight into electricity. These solar systems operate silently with no moving parts and create no emissions. Solar technology is very proven, tested and reliable. The basic technology has been in use for over 50 years in places like roadside emergency call boxes, space stations, satellites even powering hand held calculators.
Sales Tax, shipping, permitting fees, tools, certain components, installation not included. See below for more details. We have lists below for what is included and what is not included.
We will need to gather some important details from you to help determine the best size for your project, such as 12 consecutive months of utility bills.
Included in small kit
12 |
Solar Modules 265 watt (3180 watt) |
|
1 |
3000 watt inverter |
|
1 |
Junction box |
|
1 |
AC 30 Amp Disconnect (for existing breaker box) |
|
1 |
50 ft M/F Module Wire |
|
20 |
Grounding mid-clamps |
|
8 |
Grounding lugs |
|
1 |
Safety labels |
|
4 |
Splice bars |
|
10 |
End clamps |
|
24 |
Flash roof kit (for comp roof only) |
|
8 |
12 ft mounting rails |
|
24 |
Wire clips to module frame |
|
1 |
Permit form |
|
1 |
Single line electrical drawing |
|
1 |
Racking mount manual |
|
3 |
Consulting (3 hours included. Additional hours available as needed) |
|
Not Included in Small Kit
Labor |
Solar system install |
Labor |
Site work and prep |
Conduit and wire run |
From solar panel junction box to inverter |
Conduit and wire run |
From inverter to breaker panel |
Ground wire |
From solar panels to junction box |
DC |
Disconnect (if needed) |
Roof Seal |
Mastic/Siloflex for roof jacks, flashing and caulking as needed |
Weather head on roof |
(if needed) |
Sales tax |
(if sold to end user customer in the state of California) |
Shipping |
Of all hardware and components |
Miscellaneous |
Nuts, bolts, clamps, wire ties, tape, additional necessary grounding lugs and wire (weebs may eliminate most grounding hardware) |
Permitting costs |
Costs associated with permitting, inspections or rework |
Tools |
Tools needed to complete project |
Consulting |
Consulting (3 hours included. Additional hours available as needed) |
Included in Medium KIt
24 |
Solar Modules 265 watt (6360 watt) |
1 |
6000 watt inverter |
2 |
Junction box/combiner |
1 |
AC 40 Amp Disconnect (for existing breaker box) |
2 |
50 ft M/F Module Wire |
40 |
Grounding mid-clamps |
16 |
Grounding lugs |
1 |
Safety labels |
8 |
Splice bars |
20 |
End clamps |
48 |
Flash roof kit (Composition roof only) |
16 |
12 ft mounting rails |
48 |
Wire clips to module frame |
1 |
Permit form |
1 |
Single line electrical drawing |
1 |
Racking mount manual (install) |
1 |
Inverter manual (install) |
3 |
Consulting (3 hours included. Additional hours available as needed) |
Not Included in Medium Kit
Labor |
|
Labor |
Site work and prep |
Conduit and wire run |
From solar panel junction box to inverter |
Conduit and wire run |
From inverter to breaker panel |
Ground wire |
From solar panel to junction box |
DC |
Disconnect (if needed) |
Roof Seal |
Mastic/Siloflex for roof jacks, flashing and caulking as needed |
Weather head on roof |
(if needed) |
Sales tax |
(if sold to customer in the state of California) |
Shipping |
Of all hardware and components |
Miscellaneous |
Nuts, bolts, clamps, wire ties, tape, additional necessary grounding lugs and wire (weebs may eliminate most of these) |
Permitting costs |
Costs associated with permitting, inspections or rework |
Tools |
Tools needed to complete project |
Consulting |
$95 per each additional hour. (3 hours of consultation is included in the original purchase) |
LARGE
Included in Large Kit
36 |
Solar Modules 10,260 watts (Solar World SW285 $0.95 watt) |
2 |
5000 watt inverter (2X -SMA SB5000TLUS-22) |
2 |
Junction box/combiner |
2 |
AC 60 Amp Disconnect (for existing breaker box) |
4 |
50 ft M/F Module |
52 |
Grounding mid-clamps |
24 |
Grounding lugs |
2 |
Safety labels |
12 |
Splice bars |
32 |
End clamps |
40 |
Dual Rack to Rail Adapter 2 inch with 3/8 hex bolt and nut |
30 |
Hollaender #5T 1 ½ inch |
24 |
12 ft mounting rails |
65 |
Wire clips to module frame |
1 |
Permit form |
1 |
Single line electrical drawing |
1 |
Racking mount manual (install) |
1 |
Inverter manual (install) |
3 |
Consulting (3 hours included. Additional hours available as needed) |
Not included in Large Kit
|
|
Labor |
Site work and prep |
Conduit and wire run |
From solar panel junction box to inverter |
Conduit and wire run |
From inverter to breaker panel |
Ground wire |
From solar panel to junction box |
DC |
Disconnect (if needed) |
Roof Seal |
Mastic/Siloflex for roof jacks, flashing and caulking as needed |
Weather head on roof |
(if needed) |
Schedule 40 Metal Supporting Pipe |
For supporting solar modules and racking (available at local plumbing/hardware supply outlets) These will be the main legs and bracing for the mounting structure. |
Sales tax |
(if sold to customer in the state of California) |
Shipping |
Of all hardware and components |
Miscellaneous |
Nuts, bolts, clamps, wire ties, tape, additional necessary grounding lugs and wire (weebs may eliminate most of these) |
Permitting costs |
Costs associated with permitting, inspections or rework |
Tools |
Tools needed to complete project |
Consulting |
$95 per each additional hour. (3 hours of consultation is included in the original purchase) |